Oem Rexroth Sun Valve 160/100-258 Equipped Car Dumper with
Hydraulic Cylinder and 2500mm Maximum Stroke Hydraulic Cylinders
for Water Conservancy Projects Good Hydraulic Cylinders – We Make Sure Inside PartsThe tube follows GUOYUE CD250 style.
Tube steel can be 45#, 42CrMo, or 27SiMn.
Hole is ground to H8 and feels smooth, Ra under 0.4 μm.
Head, base, ears, and piston are only 45# steel.
We do not use cast iron or cast steel. Slow-Down Parts
You can pick fixed bumpers or floating bumpers so the rod slows
down safe at any speed or load. Welds
We hit every heavy-load weld with ultrasound.
This takes away most of the stress and makes the weld last longer.
Seals
We only use top seals from NOK (Japan), Trelleborg (Sweden), Merkel
and GP (Germany).
We do not use local seals. Checks
Each cylinder is tested to GB/T15622-2005 and our own
Q/GAKY014-2023.
You get a test sheet and a pass paper. Promise
We give one year cover from ship date.
If it breaks because of how we made it, we fix or swap it for free.
This cylinder is strong. It uses thick steel and hard rod. It does
not bend. The seal keeps oil in, no leak. It has many tubes that
slide out one by one. It lifts high but stays short Easy-going
Advantages
This OEM Rexroth Sun Valve 160/100-258 dumper cylinder stretches a
full 2.5 m yet fits neatly under tight decks. Smart water-cooling
keeps it cool on hot days, while tight seals stop leaks for years.
Rugged steel, chrome rod, and adjustable cushioning mean smooth,
quiet lifts every time. Pick ports, paint, or sensors you
like—factory tweaks ship fast and stay wallet-friendly. Easy-going
Uses
Think river locks raising heavy gates, dam spillways tilting debris
screens, or irrigation canals dumping loads of silt. It also loves
busy docks, railcar dumpers, and construction sites where long
reach and cool running beat heat and grime every day.
Application | Engineering machinery, mine, shipping, metallurgy, water
conservancy, offshore, agriculture, etc. |
Seal | Parker, Merkel, NOK, Hallite,etc. |
Paint | Red, Grey, Yellow, Black, etc. |
Material | St52, CK45, 4140, Duplex2205, Stainless Steel 304/316, etc. |
Certificate | ABS, Lloyds, SGS, etc. |
Package | Bubble-wrap packing, then in wooden case. |
Color | choose the color according to customer requirement |
Core components | Bearing,Pressure vessel,Pump |
Is it a standard part? | Nonstandard |
Structure | Piston Type, Plunger Type, Telescopic Type, |
Power | Hydraulic & Pneumatic |
Brand | Guoyue |
Sample | Available |
1. who are we?
We are based in Jiangsu, China, start from 2022,sell to Domestic
Market(40.00%),Africa(10.00%),North America(10.00%),South
America(8.00%),Southeast Asia(6.00%),Western Europe(5.00%),Eastern
Europe(5.00%),Mid East(5.00%),Central America(5.00%),Eastern
Asia(2.00%),Oceania(2.00%),Northern Europe(1.00%),South
Asia(1.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
hydraulic cylinder,hydraulic cylinder,Single-acting hydraulic
cylinder,Double-acting hydraulic cylinder,construction machinery
hydraulic cylinder
4. why should you buy from us not from other suppliers?
Guoyue Hydraulic Equipment Manufacturing (Jiangsu) Co., Ltd., with
a registered capital of 50 million yuan, is a private
technology enterprise that integrates research, design,
development, production, operation, and service. The company
specializes
in the
5. what services can we provide?
Accepted Delivery Terms: FOB；
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T;
Language Spoken:English,Chinese
